CARB / AIR BOX / ELIMINATOR KITS -

Click here for Jetting


Power Maxx
Predator Carburetor

Power Maxx ®
45mm and 48mmCarbs

Specially built for the modified Predator 500/558engines. These carburetors use the stock choke cable.
All require the thumb throttle & cable

45mm Carb: Designed to be used with modified or mildly ported engines. Good all around carb. MX, Play, or Dunes. Flows over 185 CFM. Includes intake manfiold.

48mm Carb: Designed to be used with our CNC ported heads. Best horsepower (you must keep RPM up to have the best throttle response) Best for oval, drags or dunes. Carb flows over 200 DFM. Includes intake manifold.

NOTE: If you do not have HPD head porting, PREIMA (intake manifold adapter) required. see below

45mm Carb:

Part # PMTM45

List Price: $450.00
Qty:

48mm Carb:

Part #PMTM48
List Price: $550.00


Qty:

 

NOTE: If you do not have HPD head porting, PREIMA (intake manifold adapter) required with purchase of carb.

Part # PREIMA
List Price: $20.00


Qty:


Power Maxx 47 MM
Drag Carb for 416

Designed specifically for the 416 Power Maxx engine. Will work for drag or oval racing. Carburetor flows 200 CFM and has excellent throttle response and horsepower. Requires the use of the new style rubber intake manfold and a fuel pump with approximately 4-5 psi.

Fuel Pump, Air Filter, Aluminum Thumb Throttle and Cable required.

47mm Carb

PART # PMVM47
• LIST $400.00

Qty:

 

250 Keihin Carb Kits

Carb Kits include: Adapters, jet kit and clamps.

Click here for:
JETS, NEEDLES, AND SLIDES

35 PWK Keihin Carb Kit

This carb is for the race mod 250 Trail Blazers. 3 more horsepower than the stock carb, with much more throttle response!

NOTE: Intake manifold included with this carburetor.


Specify Stock Airbox or Custom Clamp-on in 'comments' section of the order form
.

250 Trail Blazer mods
PART # 35PWK250
• LIST $280.00

Qty:

Fill out this form to send with mods

Intake Manifold for
35 PWK Carb Kit:

PART # VM34200
• LIST $18.00

Qty:

Fill out this form to send with mods

400 Keihin Carb Kits
FOR USE WITH WITH CLAMP ON AIR FILTER

Carb Kits include: jet kit and clamps.

Click here for
Jets, Needles, and Slides

39 PWK Keihin Carb Kit

This is the carb we use on all our mod 400s. 3 to 5 more horsepower than the stock bored carb, with much more throttle response!

 

400 Polaris w/trail mod
PART # 39PWK400TM
• LIST $290.
00

Qty:

400 Polaris w/race mod

PART # 39PWK400RM
• LIST $290.00

Qty:

 

400 Keihin Carb Kits
WITH STOCK AIRBOX


Includes: jet kit, clamps, machining of carb and adapter

Click here for: Jets, Needles and Slides

39 PWK Keihin Carb Kit

This is the carb we use on all our mod 400s. 3 to 5 more horsepower than the stock bored carb, with much more throttle response!

400 Polaris w/trail mod

PART # 39PWK400TMA
• LIST $300.00

Qty:

400 Polaris-Piped with stock motor

PART # 39PWK400A
• LIST $300.00

Qty:

400 Polaris w/race mod

PART # 39PWK400RMA
• LIST $300.00

Qty:

 

NEW !!


Custom Aluminum
Thumb Throttle
for Predator

This thin and easy to use throttle has a large adjustable position thumb lever, and a variable ratio pull for easy trail riding at low throttle settings. Adjustable stops for direct pull carburetors.

Custom cable required separately

WARNING: This RACE part has no electrics.


New Version
Thumb Throttle

for Predator
PART # ATT05
• LIST $140.00

Qty:

Custom Cable
for ATT05

PART # SCATT05
• LIST $35.00

Qty:

Fuel Pump Kit

Power Maxx 416s with 47mm carb and some race mod 400s with 39 PWKs require a fuel pump to supply sufficient fuel flow.
Kit includes high output Mikuni pump. Pulse and fuel line, fittings, filter and installation guide.

You will have to change your needle and seat to use this fuel pump

Fuel Pump Kit

PART # FPK
• LIST $65.00

Qty:

500 Carburetor Jetting Kit

For use with airbox lid removed or highly modified airbox.

Includes: CV Spring, Main jet, Needle Jet, drill bit and instructions.

Carb Mod Kit
PART# CK5S
• LIST $
30.00

Qty:


Starter Eliminator Kits

Kits includes: Cover plate, gasket, and 3 nylock nuts.

400 Polaris Eliminator Kit
PART # SEK
• LIST $27.00

Qty:

250 Polaris Eliminator Kit
PART # SEK2
• LIST $27.00

Qty:


Oil Injection
Eliminator Kits

250 Oil Injection Eliminator
(not shown in photo)
PART # OIEK2
• LIST $27.00

Qty:

400 Oil Injection Eliminator
PART # OIEK
• LIST $27.00

Qty:

Single Throttle Cables

For use with the oil
injection eliminator kits.


For Polaris Metal Throttle
PART # STC
• LIST $35.00

Qty:


For Polaris Plastic Throttle
PART # STCP
• LIST $35.00

Qty:

Top of Page