AGGRESSIVE CLUTCH KITS & TEAM SECONDARY

Back to clutch list

Aggressive Clutch Kits

Aggressive clutch kits are faster accelerating, plus more mid range response. Back shift is improved at all speeds. These kits also improve belt life. All have been tested for accuracy on dynoed engines with on board computers. This is the best performing trail set up.

Kit includes: Helix, weights, 2 springs, installation guide, and shims (if needed).

NOTE: If this kit is being ordered with a Team Roller secondary or HPD Roller Conversion. (SDCK ), NOT EBS, please state that in the "Comment" section of the online order form and the kit will come without a helix and the price will reduced to $95.00.

Custom clutch kits can be made for most Polaris ATV's and modifications. All kits are for 0 to 2000 ft. elevation. You must state if your use will be for higher altitudes.

400 Sport/Scrambler

With stock engine and pipe.
Higher engagement then stock.

PART # ATVCK4A
• LIST $190.00

400 Sport/Scrambler

With race ported motor and ATVRP8 pipe

PART # CK4RM8
• LIST $190.00

500 Scrambler

With stock or modified engine with pipe. Higher engagement then stock.

PART # ATVCK5PA
• LIST $190.00

New Version TEAM Clutch
TAS-03X

YOU NEED TO SPECIFY MODEL AND ANY MODIFICATIONS ON YOUR MACHINE.
(in the "Comments" section of order form)

These kits are industry leaders for providing smooth and precise upshift and backshift, which improves your efficiency, performance and durability. Tunable with custom cam angles and springs. Twin roller operating in enclosed helix track.

TAS-03X includes spring and helix

EBS Driven Secondary Clutch
Best back shift
plus engine braking.
For 416s and 400s.
Call for application.
We setup clutch specifically for each rider.

PART # TAS-03X
•LIST $369.00

Secondary Clutch Assembly ONLY

Same secondary clutch as above,
but just a secondary clutch assembly

PART #TAZ03X
• LIST 339.95

TAS99 Team Secondary Clutch Springs

Secondary springs control shift rate.
Fine-tune your secondary clutch with TEAM springs manufactured to the most exacting specifications.
Spring Height at 2.4" - 1.4"

Black/Red
120-185 Wt
PART # 210090
• LIST $24.95

TAS03 Team Secondary Clutch Springs
Chart 1
Load Heights at 2.05" + 1.05"


Secondary springs control shift rate.
Fine-tune your secondary clutch with TEAM springs manufactured to the most exacting specifications.

Bright Green/Purple
105-185 Wt
PART #210314-001
• LIST $24.95

TAS03 Team Secondary Clutch Springs
Chart 2
Load Height at 2.0" - 1.0"


Secondary springs control shift rate.
Fine-tune your secondary clutch with TEAM springs manufactured to the most exacting specifications.

Green / White
105-185 Wt
PART # 210215
• LIST $24.95

Used to change springs in all ATV/UTV secondary clutches

PART # 930001
• LIST $77.00