RZR
Ranger
Ranger
|
|
|
|
|
|
Click-
video at idle.................Click-
video revv'n
Installation
Pics
IN STOCK NOW
.jpg)
.jpg)
Twin
Pipe Header
with Spark Arrested Silencer
Stepped
head pipes. Exceptional powerband. Designed to run on stock or
modified motors. Nickel Chrome plate finish with aluminum muffler
and billet end cap.
After
extensive testing,we have a final version of the dual head pipe
RZR pipe. Designed to improve the power and widen the powerband.
|
PART
#RZRTPH
$645.00
Available
Now!
|
|
|
IN
STOCK!
RZR/Ranger 700
Oil Cooler Kit
Kit
contains polished aluminum oil cooler, Two piece oil filter to
cooler adapter, 4 fittings, 3 mounting clamps, 8 Ft High Pressure/
High Temp Push-On hose with clamps, and instructions.
Optional thermostat available late summer.
|
Introductory
Price:
PART #RZROCK
LIST $189.00
|
Version
4
NEW FORGING
High Compression Pistons

SOLD EACH
|
High
Compression Pistons
Pump Gas (Sold Each)
Increased
Horsepower because of the design.
--Anti-friction coating
--11.2
to 1 and 12.2 to 1 Forged Pistons
--Improved combustion pocket
--Improved squish area and clearance
--16g 28g lighter weight &new forging for improved
strength
--Anti-detonation rings
--Forced wrist pin oiling
--Anti-Friction coating
|
11.2
to 1
PART
#RZRP112
LIST $ 162.00 EACH
|
12.2
to 1
PART
#RZRP12.2
LIST $169.00 EACH
|
STOCK
SIZE
RZR Valves
.jpg)
1 Piece stainless steel intake and exhaust valves.
Available in stock size
|
Stock
size INTAKE Valve
PART #RZRVINS
LIST $45.00 ea
|
Stock
size
EXHAUST Valve
PART #RZRVEXS
LIST $45.00 ea
|
OVERSIZE
RZR Valves and Seats
(CUSTOM ORDER ONLY)
.jpg)
.jpg)
1
Piece stainless steel intake and exhaust valves.
|
+2mm
INTAKE Valve
PART #RZRV2IN
LIST $75.00 ea
|
+2mm
EXHAUST Valve
PART #RZRV2EX
LIST $75.00 ea
|
+
2 Intake Seat
PART #RZRIVS2
LIST $16.00 ea
|
+2
Exhaust Seat
PART #RZREVS2
LIST $15.00 ea
|
IN
STOCK!
RZR Valve Guides
.jpg)
We just received
our first shipment of RZR valve guides. They are made from Ampco
45 Aluminum Bronze, and have Our Proprietary design. Made for stock
or ported engines. They will Increase flow in a stock port. Correct
Length for valve lifts over.480" when used with HPD's Light
Weight Valve Spring sets. Intakes have provisions for valve seals
and Exhausts have a raised center to shed oil. They
are sold each or in sets of 4 with 2 intake seals.
|
Exhaust
Guide
PART #RZREG
LIST $28.00 EACH
|
Intake
Guide
PART #RZRIG
LIST $26.00 EACH
|
SET
OF 4 Guides with 2 seals
PART #RZRGS
LIST $118.00
|
Seals,
Intake Valve, each
PART #RZRSVI
LIST $8.00
|
Clutch
Kit for 2008 RZR
|
HPD's
aggressive version for the RZR
Custom
springs and helix makes this kit smooth and fast.
Includes: balanced weights, engagement washer, HPD primary and secondary
springs with a custom cut HPD helix.
|
PART
#RZRCKS
LIST $199.00
|
Clutch
Kit for 2008 RZR
|
HPD's
aggressive version for MODIFIED RZR
Custom
springs and helix makes this kit smooth and fast.
Includes: balanced weights, engagement washer, HPD primary and secondary
springs with a custom cut HPD helix.
|
PART
#RZRCKM
LIST $199.00
Please specify in comments section of order form the equipment
modifications you have done to your RZR
|
Clutch
Kit for 2008 RZR
Complete Mod
(ported head and Trail Mod+ Cam)
|
HPD's
aggressive version for COMPLETE MODIFIED RZR
Custom
springs and helix makes this kit smooth and fast.
Includes: balanced weights, engagement washer, HPD primary and secondary
springs with a custom cut HPD helix.
|
PART
#RZRCKCM
LIST $199.00
Please
specify in comments section of order form the equipment modifications
you have done to your RZR |
Valve
Spring Set
Dual
Chrome Silicon Springs are lighter than stock and will allow valve
lift to at least .480 Inches or 12.2 MM. Retainers
are 1.4 grams Lighter than titanium, and just as strong. Made from
a new metal developed for Military Weapons. Recommended for engines
with more than .430 valve lift. RZRPRS Push rod set recommended.(below)
|
PART
#RZRVSS
LIST $155.00
Now
in stock!
|
RZR
Pushrods
Made
from heat treated 4130 Chromolly. 2 grams lighter and good for 500
pounds of open pressure.
Adjustable Push rods are for solid lifters.
Don't take the chance on the stock or mild steel rods.
|
EACH
PART #RZRPR
LIST $27.50 |
SET
OF 4
PART #RZRPRS
LIST $105.00
|
ADJUSTABLE
|
EACH (Adjustable)
PART #RZRAPR
LIST $29.50
|
SET
OF 4
(Adjustable)
PART #RZRAPRS
LIST $110.00
|
|
.jpg)
Call for availability
If
you're not sending a cam core (HIGH LIFT), you must order Part
# RZRCC (below)
|
Trail
PowerMaxx Cam
The
trail version of our Powermaxx cams have more
than .427" valve lift. You will get a 5 hp gain on a stock
motor. This version is for stock or modified engines.
Push Rods and 11.2 Pistons recommended.
|
Trail
Cam
PART
#RZRTMC
LIST $220.00
NO
EXCHANGE REQUIRED
|
High
lift trail PowerMaxx Cam+
Higher
lift and more duration than the trail version. Trail mod Cam+
is at least 2 seconds quicker, 0 to 60 mph, than the trail cam.
Requires
Push Rods, Valve Spring Kit, and Guides.
The High
lift Trail version is for modified engines. |
High
Lift Trail Cam
PART
#RZRTMC+
LIST $312.00
|
|
.jpg)
Call for availability
If
you're not sending a cam core, you must order Part # RZRCC (below)
|
Race
PowerMaxx Cam
The
Full Race version is for Ported Heads with Our Stainless Valves,
Valve Guides, Spring Kit, Push Rods and 11.2 Pistons.
We are not giving out cam data at this time. All cams are design for peak Horse
Power at under 7000 rpm.
|
|
|
.jpg)
Cam Core
|
New Lower Price!
CORE CHARGE for RZRTMC+ & RZRRMC
You
must send a core with your order or be charged a core charge.
|
PART
#RZRCC
LIST $155.00
|
|
|
Head
Porting w/stock size valves
1
Piece stainless stock size valves, set of springs, Ampco 45 guides,
Hi-temp seals & combustion chamber modifications.
Professionally ported by technicians with 30 years experience.
|
|
SPECIAL
ORDER ONLY
Head Porting w/+2 valves
1
Piece stainless +2mm oversize valves, set of springs, Ampco 45
guides, Hi-temp seals, larger valve seats & combustion chamber
modifications.
Professionally
ported by technicians with 30 years experience.
|
|
|
|
Iridium
Spark Plugs
One
stage colder for modified motors.
For modified RZR Ranger and Sportsman 800
Best
plug available
U-groove with an iridium tip.
|
Part
# BKR8EIX
LIST $12.00
|
Bored
and Modified Throttle Body
We bore your throttle
body to 44mm at the throttle plate and tapered bigger from there. The
throttle shaft is contoured and the screws countersunk
to remove turbulence.
NOTE: When you bore your throttle body, we recommend using a Power
Commander or Boondocker Fuel Controller. Most other controllers won't
supply
enough fuel or a smooth transfer of power. |
Throttle
Body
PART #RZRBTB
LIST $189.00
You
must send your clean throttle body, with
external parts removed. (DO NOT remove throttle plate)
Fill
out this form to send with mods
|
|
.jpg) |
|
|
RZR
Exhaust Gasket
Heavy duty laminated & reusable.
|
PART
#RZREGK
LIST $20.00
|
|
|
RZR
Head Gasket
Heavy duty laminated Head Gasket
PART
#RZRHGK
LIST $30.00
|
RZR
Base
Gasket
Heavy
duty Base Gasket
PART
#RZRBGK
LIST $18.00
|
|
|
IN
STOCK!
RZR
Steering Post Bearing Kit
Kit
contains two 660 Bronze sealed bearings, grease zirc, two quad
ring seals, loctite, drill, tap, sanding flapwheel, and instructions.
|
PART
#RZRSPBK
LIST $49.00
|
|
Aluminum
Wheel Spacer Kit
Billet aluminum spacers widen your RZR 3 inches.
Supplied with studs for mag or steel wheels.
Sold in sets of 2.
|
PART
#RZRWS15
LIST $146.00
|
|
Clutch
Puller

|
RZR
PRIMARY CLUTCH PULLER
This
2 pc tool, specially designed for RZR Ranger, is used
to remove the motor clutch . Will work with all Polaris
RZR, Ranger & ATV's primary clutch.
PART
# RZRPCP
LIST $35.00
|

|
RZR
Air Filter Outerwear
Outerwear
designed for the K&N Filter (above)
|
Outerwear
PART #RZRFO
LIST $15.00
|

|
RZR
Recharge Kit
Contains
cleaner and oil for your K&N Filter.
|
PART #KNRCK
LIST $10.00
|
|

|
Crank
Case Vent Filter
Crank
case vent filter to be used when using clamp on filters
|
|
|
|
HPD's version of the
STAGE II clutch upgrade
.jpg)
Get rid of the
chatter with this easily adjustable kit.
Built from the
newest #930952 TAS-03X rubber dampened base clutch, with HPD's
exclusive adjustable belt freeplay.
Tuned by Master Tuner Darrell Olson. Most of the setups use our
own design helix and spring combination, "not just off the shelf
parts."
These kits are a
significant upgrade compared to the stock factory setup.These
kits come with the HPD version TEAM clutch, a
set of balanced weights, and primary spring.
Stock
Tire Kit--Stage II
These kits are designed to lower ET, greatly improve downshift and engine
breaking.
All
stage II clutch kits include HPD's exclusive
Externally Adjustable Belt Freeplay
Don't be talked into believing it doesn't help!! |
STOCK
TIRE KITS
|
Stage
II Clutch Kit
05-06 700 Ranger XP
Stock Tire Kit
0-3000 Ft Elevation
PART # CK700R-0506
LIST $359.00
|
Stage
II Clutch Kit
05-06 700 Ranger XP
Stock Tire Kit
3000-6000
Ft Elevation
PART #CK700R-0506E
LIST $359.00
|
Stage
II Clutch Kit
07 700 Ranger XP
Stock Tire Kit
0-3000 Ft Elevation
PART # CK700R-07
LIST $359.00
|
Stage
II Clutch Kit
07 700 Ranger XP
Stock Tire Kit
3000-6000 Ft Elevation
PART #CK700R-07E
LIST $359.00
|
Stage
II Clutch Kit - Non Adjustable
08 700
Ranger XP
Stock Tire Kit
0-3000 Ft Elevation
PART # CK700R-08
LIST $339.00
|
Stage
II Clutch Kit -Non
Adjustable
08 700
Ranger XP
Stock Tire Kit
3000-6000
Ft Elevation
PART #CK700R-08E
LIST $339.00
|
BIG
WHEEL KITS
|
Stage
II Clutch Kit
05-06
700 Ranger XP
with Big Wheels
0-3000 Ft Elevation
PART # CK700RBW-0506
LIST $359.00
|
Stage
II Clutch Kit-Big Wheel Kit
05-06 700 Ranger XP
with
Big Wheels
3000-6000 Ft Elevation
PART #CK700RBW-0506E
LIST $359.00
|
Stage
II Clutch Kit
07
700 Ranger XP
with Big Wheels
0-3000 Ft Elevation
PART #CK700RBW-07
LIST $359.00
|