PREDATOR PERFORMANCE PARTS
Back to Predator Engine |
|
|
|
NEW
07 Steering Post

|
Anti-Vibe
Moly Steering Post
This Anti-Vibration Steering Post with Handlebar clamp highly reduces vibration.
Nickel Chrome plated 1 1/8 X .095 Chromoly Steering Post with Aluminum Delrin
bearing clamp and Billet Aluminum 1 1/8" handlebar clamp.
|
|
|
|
|
03-06
Predator Steering Post

|
Moly
Steering Post
Nickel Chrome plated 1 1/8 X .095 Chromoly Steering Post with Aluminum
Delrin bearing clamps.
Available:
(PREMSP)
+1/2” 03-04 and -1/2” for 05-06 models.
(PREMSP2) +2 03-04 and +1 for 05-06 models
Designed to be used with CR Low Rise Handlebars
|
|
|
|
|
03-06
Predator
Anti-Vibration
Steering Post

|
Anti-Vibe
Moly Steering Post
This Anti-Vibration Steering Post with Handlebar clamp highly reduces vibration.
Nickel Chrome plated 1 1/8 X .095 Chromoly Steering Post with Aluminum
Delrin bearing clamp and Billet Aluminum 1 1/8" handlebar clamp.
Available in +2" longer than stock for 03-04 models and +1" for
05-06 models. Designed to be use with Low Rise Handlebars.
|
|
|
|
|
Anti-Vibration
Handlebar Clamp ONLY

|
Anti-Vibe
Handlebar Clamp
Fits
HPD racer, 03-07 Predator Anti-Vibe (with HPD AV Post) or Honda
type (2-bolt vibration) mounts. Available for 1 1/8 " Handlebar
only.
Power Maxx logo engraved.
|
PART
# PREHBCAV
LIST $99.00
|
|
Predator
Handlebar Clamps

Billet
aluminum clamp for 1 1/8" or 7/8" bars. Allows mounting
of stock lights and switches, including a tether switch mounting
hole.
Can
be used with HPD or stock steering post.
|
For
03-07 Models:
PART
# PREHBC78
FOR
7/8" BARS
LIST $85.00
|
For
03-07 models:
PART # PREHBC118
FOR
1 1/8" BARS
LIST $85.00
|
|
Handle
Bar
Clamps
FOR STOCK POSTS

Machined
from 6061T6 aluminum. 2 piece clamps rigidly mount super cross
or super bike bars.
HPD logo engraved.
|
HPD
Super Bike:
Bar Size: 7/8"
PART
# HBCSBS
LIST $85.00
|
HPD
Super Cross:
Bar Size: 1 1/8"
PART
# HBCSCS
LIST
$85.00
|
New
Spacers Offered for Predator Front Spring Kits, NO
MORE RATTLES!!

High-impact,
supertough zytel nylon spacers.
Uses
4 for fronts
|
Suspension
Spring Couplers
PART # SSCZY
LIST $16.00 each
Set
of 4
PART
# SSCZY4
LIST $62.00
|
|
When ordering
Suspension Spring Kits:
Specify in comments section of order form
which spacers you would like to have, if there is no comment,
you will receive the aluminum ones with the kit.
Aluminum
Spacers are longer lasting but noisy NEW Zytel Nylon Spacers are quiet and extremely tough.
|
|
Suspension
Spring Kit
for 2003 Predator

Made In The USA!
|
This
kit is designed to be used with the stock Predator Fox shocks.
These kits lower the ATV approximately 1 1/2", gives less
roll in the corners and an all around better ride. Kits are set
up for 160-180 Lb rider. Call for custom setups.
No kits available for rider weight above 220
lbs.
Kit includes a triple spring front with crossovers
and a dual rate rear.
|
Specify
in "comments" part of the order form rider weight
in full riding gear and whether or not machine has remote resivoirs.
Specify which spacers.
|
|
Suspension
Spring Kit
for 2004 Predator

Made In The USA!
|
NEW
LOWER PRICE
This
kit is designed to be used with the stock Predator Fox shocks.
These kits lower the ATV approximately 1 1/2", gives less
roll in the corners and an all around better ride. Kits are set
up for 160-180 Lb rider. Call for custom setups.
No kits available for rider weight above 220
lbs.
This kit includes a triple spring front and
rear with crossovers.
|
Specify in "comments" part of the
order form rider weight in full riding gear and whether or not machine
has remote resivoirs.
Specify
which spacers. |
|
Suspension
Spring Kit
for all 2005-07 Predators
Made In The USA!
|
NEW
LOWER PRICE
This
kit is designed to be used with the stock Predator Fox shocks.
These kits lower the ATV approximately 1 1/2", gives less
roll in the corners and an all around better ride. Kits are set
up for 160-180 Lb rider. Call for custom setups. Comes with new
zytel spacers.
This kit includes a triple spring front and
rear with crossovers.
No kits available for
rider weight above 220 lbs.
|
Specify
in "comments" part
of the order form rider weight in full riding gear and whether
or not machine has remote resivoirs.
|
For
just the REAR spring kit for all 05-07 Predators
Kit
comes with 3 springs and 2 crossovers Specify
in "comments" part of the order form rider weight
in full riding gear
|
|
For 500 Predators
 |
Front:
13 Teeth
PART # 351483-001
LIST $30.00
Must
specify year of machine in "comments" section of order
form.
|
Front:
14 Teeth
PART # 351483-002
LIST $30.00
Must
specify year of machine in "comments" section of order form. |
Front:
15 Teeth
PART # 351483-003
LIST $30.00
Must
specify year of machine in "comments" section of order
form. |
|
| |
Rear |
For 500 Predators
|
Rear:
36 Teeth
PART # 2874321
LIST $28.00
|
Rear:
37 Teeth
PART # 2874317
LIST $28.00
|
|
|
|
Tether
Switch
Add
safety to your ATV with a tether switch. anyone racing or riding
aggressively should have one. Also a good safety idea for the
beginner. Mounts to stock dash or HPD handlebar mounts
|
PART
# PRETS
LIST $30.00
|
|
|
HPD
Professional
Sway Bar

|
A
must for serious TT, oval, or ice racer. Aluminum (6061T6) frame
and torsion arms, bronze bushing, and a heat treated tubular chrome
silicone steel sway bar, which is silver bronze welded to 17-4
stainless ends. Adjustable aluminum links with wrench flats. High
quality 3-piece rod ends on both ends. Available with 35-55 lb
torsion bar. Engraved with "HPD Performance Quads"
|
|
| |
|
HPD
Adjustable Steering Damper

|
New Lower Price!
Hydraulic
steering damper for the Polaris Predator. Helps save your arms
and thumbs on rough trails or tracks. The damper unit has a 7-position
clicker adjustment. Easy bolt on mounting. |
|
|
|

|
Steering
Damper Post Clamp
Required when
changing from stock to HPD post.
Specify
what size steering post on "comments" section of order
form. |
|
|
|
|
|
|