Hpd Sale Items

HOME
Product Index

900XP
Predator
250 Trail Blazer
400 Scr/TB
Outlaw
500 Scrambler
Sportsman & Other
RZR
Ranger

Exhaust
Clutch Parts
Engine Mods
Misc Parts
Air Filters
Tools
*Closeouts*
Sale Items
Terms

HPd® 29940 Hwy 169 NW, Princeton, MN 55371
Ph: 763-389-3336
Fax: 763-389-1474

Sale Items
For Closeout and R&D Specials click here
Previous Page	Next Page
2008-2011 RZR Pushrods Made from heat treated 4130 Chromolly. 2 grams lighter and good for 500 pounds of open pressure. Don't take the chance on the stock or mild steel rods.	ON SALE!! SET OF 4 - For high lift cams PART #RZRPRS+50 • LIST $~~110.00~~ $50.00 Qty:
Predator/Outlaw 500 High Output Starter Tested on Tony Parsley's 9MM stroker with a 14.5:1 Piston, and it started OK.	IN STOCK! This starter has a much higher Torque rating than the Polaris original. The stock starter is rated at .6KW and ours is rated 1.0KW. Install the starter per factory specs. HPD recommends that all of the #6 battery cables be replaced with #4 copper cable, with soldered copper ends. HPD also recommends our High Output Battery (Part #PMB235) This battery has 235 Cold Cranking Amps and the stock battery has 120 Cold Cranking Amps.	ON SALE: List Price: $314.00 Sale Price :$275.00 PART #PREHOST LIST $ ~~314.00~~ $275.00 Qty:
Thumb Throttle Kit (Includes Throttle and Cable) WARNING: This RACE part has no electrics.	Custom Aluminum Thumb Throttle for 500 Predator This thin and very small throttle has a large adjustable position thumb lever, and a variable ratio pull for easy operation. Adjustable stops for 40-48mm cam operated carbs such as Mikuni TMHSR's Custom cable required Predator Throttle Cables This cable is designed for HPD's version of the 42, 45, 48 mm Mikuni TM-HSR Carburetor	New Version Thumb Throttle PART # ATT05 • LIST $140.00 Custom Cable for ATT05 PART # STCATT05 • LIST $35.00
		Thumb Throttle Kit (Includes Throttle and Cable) PART # ATT05+C • LIST $~~175.00~~ SALE PRICE: $100.00 Qty:
Predator Handlebar Clamps Billet aluminum clamp for 1 1/8" bars. Allows mounting of stock lights and switches, including a tether switch mounting hole. Can be used with HPD or stock steering post.	For 03-07 models: PART # PREHBC118 FOR 1 1/8" BARS • LIST $~~85.00~~ SALE PRICE: $45.00 Qty:
NEW PRICING! Yamaha YFZ 450 Post 1 1/4" 4130 chrome moly post with heat treated, high strength shaft and spline. +2" length with 15mm offset.		POST ONLY PART #MSPYA450 • LIST $~~159.95~~ $115.00 Qty:
		POST with CLAMP PART #MSPYA450C • LIST $~~239.95~~ $150.00 Qty:
Bell Crank (Flag) YAMAHA	SALE : $49.99 Bell Crank for Yamaha steering post. Relocates ty rod location to improve bump steer.	SALE PRICE Bell Crank (Flag) PART #YABC • LIST $49.95 Qty:
Reed Spacer Kit 400	THIS ITEM IS ON SALE! $25.00!! For Polaris 400 only. Increases horsepower and extends reed life. A must for big bores, to correct primary compression.	400 Polaris PART # RSK • LIST $~~37.00~~ $25.00 Qty: